IDRS 2010 – Oklahoma University

The 2010 International Double Reed Society (IDRS) Festival was held at Oklahoma University in Norman, OK. This was my 5th festival since starting in 2004, and it was a great week of music, fun and friends. It is also a chance for my mom and me to spend some time together since I really only travel to the US for business. She helps out at the table and has become a fixture as part of Jende Industries.

To start off the trip, we missed our flight due to the heavy traffic at Newark airport, long lines, and an even longer security line. I’m guessing arriving late with only 1 hour to spare didn’t help the situation…

We were put on standby for the next flight, but they only called my name, so I declined and we were put on another standby list. We made that flight and went out to Houston, then connected to Wills Rodgers World Airport in Oklahoma. For some reason, my suitcase for the show didn’t make the connection but our clothing suitcase did. Continental’s staff at the luggage carousel were very nice and accommodating, and I was surprised at how quickly they found and rerouted my suitcase. It was left in Houston, so it was put on the next flight later that day and was delivered to the hotel a few hours later. I wasn’t worried, but was relieved.

During the setup we ran into the usual suspects. IDRS is a small world, and many of the vendors have been part of the exhibitions forever, but it’s always nice to see a couple of new faces. The most important face, however, must be that of Norma Hooks, who is the coordinator of the exhibitions. She runs a tight ship, and I have never heard of a problem that she couldn’t fix. IDRS would fall apart without her. Her staff of volunteers were also great and helpful – a special thanks to A.J. (I didn’t get his last name) who was Norma’s right hand man, and the Student Union staff for getting me my lost box (which the postal service misrouted).

Since I am somewhat unique as a “knife guy” in a world of oboes and bassoons, my table is full of knives and sharpening stones, my book, and my demo setup. We asked for additional lighting, and someone from the student union maintenance staff (I didn’t get his name) delivered one, and naturally, the conversation turned toward knives (since he asked). I invited him to sit down and he showed me his little Every Day Carrier (EDC) which was a little 1.5” buck knife. It was dull, of course, and I started to sharpen it on the 1K Shapton Pro stone while we chatted. His eyes lit up when I was finished, and he left satisfied. 20 minutes later, he came back with 5 more guys. 🙂  Not all of them had knives, but I did a couple more, including 2 Spydercos and at least 1 SOG and it was a great way to pass some of the time until we were ready to return to the hotel.

Opening day of the exhibitions brought some immediate customers. I offer reed knife sharpening demos and services and people come and drop off their knives, check out the exhibits, see a few concerts, then come back to pick up their knives. As I sharpen their knives, there is a constant group of interested people sitting on my end of the table watching me sharpen and either listening intently or asking questions. Some people literally make a morning or afternoon out of it. This year’s official “camper” was Clyde Morris (below). He was absolutely delightful to spend time with – and he has very good sharpening technique! We talked knives, but not the usual stuff. We got into the types of steels and their qualities and potentials, the differences between the edges and longevity depending on the grain structure, integrity, and hardness – things that musicians generally don’t talk about without their eyes glazing over. We also talked about a wide variety of musical topics, including concepts of musicianship and values of today’s instrumentalists. It was a total treat.

Sometimes I get lucky and some of the more visible names stop by my table to say hello. Delmar Williams and Harold Emert  (pictured below) are two active forum and IDRS community members who stopped by. I met Delmar a few years ago, and it was great to see him again and chat for a few minutes. With Delmar, six degrees of separation are reduced to about 2. This was the first time I met Harold Emert in person, who has been playing in Brazil for the last couple of decades. I was completely surprised by his very heavy New York Jewish accent (he sounded exactly like my Uncle Sol). When I looked over and saw the name tag I did a double take because his voice sounded nothing like his posts! He ended up buying a knife and we got a good picture. 🙂

Speaking of visible – one of the most easily recognized people at the IDRS has to be Frances Colón, Principal oboist in the Puerto Rico Symphony. She is a beautiful woman (both inside and out) with such flair and pizzazz.  An extremely accomplished player, she has been an “Oboe Angel” to the more impoverished students in Puerto Rico by providing instruments, supplies and lessons for students without the means. She is now up to 19 (I think) students. For the first couple of years, Frances personally funded the entire thing from instruments to reeds to music to accessories. Her efforts have now been recognized by several foundations in Puerto Rico, and have given her some support and funding. I offered to send some of my knives to her for the kids. Her jaw dropped, tears swelled, and hugs and kisses followed.

Two days later, we had an exciting lunch meeting with Hannah Selznick – only she is the “Oboe Fairy”. Hannah is also doing what she calls “missionary” work by supplying low cost and sometimes free (mostly second hand) oboes that are fully serviced and ready to play. She also includes some basic accessories out of her own pocket. While Frances is focused on Puerto Rico, Hanna’s efforts are spanning the globe. We had a great brainstorming session, laying down some  groundwork for networking and working together to possibly form an official non-profit organization in the future that will promote oboe playing (and perhaps even more).

Again, I offered my expertise as a knife guy to supply inexpensive reed knives that are sharpened correctly and easily maintained. Frances immediately called me the “Knife Fairy”, but I don’t think it portrays the right image of me…

Below is a picture of “The 3 Fairies”

As this idea progresses, I will be making individual posts.

One last highlight was sharpening 2 wonderful knives owned by Yoshiyuki Ishikawa, the bassoon professor at the University of Colorado. These were Japanese made, and of very high standards. The first one was a hollow ground single bevel. The hollow ground side was easy, but the bevel had rounded over. This was some hard steel – about RC 63-64. I eventually took it down to the #320 Shapton Pro. When I got the bevel straightened, I noticed some chips in the edge. Ugh… It took a while, but I eventually got them out. I went from the #320 to the 1K, then the 2K, and finished with the 5K. This thing was sharp. I also used alternating scratches at each level to really make it like polishing a samurai sword. The second knife was a flat almost Scandinavian grind. This was softer steel, about RC 58, but much thicker. The original grinding on the bevels was flat, and was therefore very easy to sharpen up. I used the #320 and alternated the scratches on a 1K, which really brought out the grain of the steel and the temper line. I touched the edge up at a slightly higher angle on the 5K. It made Yoshiyuki smile. Sadly, as it was near closing time, I did not get a picture of the knives.

That was pretty much it. We went out to an excellent Thai-Fusion restaurant with Dimiter Jordanov of Le Roseau Chantant at a place called ChaTime, right down the road from the hotel. If you are ever in the OU or Norman, OK area, it is a great place to eat. I had the Thai Green curry one night, and as a tradition after a successful show I had an incredible rib-eye steak the last night. Also, a special thanks to the staff and drivers at the Norman Best Western, who carted us around and picked us up all week. I can’t wait until next year!

Advertisements

Tags: , , , , , ,

2 Responses to “IDRS 2010 – Oklahoma University”

  1. Bill Hulsker Says:

    I wasn’t able to this year so I Really enjoyed your summary of IDRS. I’ve met some of the same people you know and missed seeing them. Hopefully I’ll get there next year.

    Thanks again Bill
    (bassoon)

    • Jende Industries Says:

      Thanks, Bill! I had a wonderful time, and since I missed last year, it was even better! I’m really looking forward to Arizona next year Hopefully you’ll be able to make it.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: